Technical Specs
LIGHT ENGINE
DLP® Type and image resolution: 1-chip DMD 0.67” UHD
Image Resolution: 4K UHD (3840x2160 pixels): 8.3M pixels
Dynamic Range: HDR compliant for precise natural colors
Color Wheel: 6 segments (RGBRGB)
Lens: High definition pure-glass lens optics
Light Source and brightness(1): 300W lamp (dimmable) up to 2,200 Ansi Lumens
INSTALLATION
Lens Throw ratio (+/-5%): 1.4-2.0:1
Zoom & Focus: Manual
Projection angle: 12 degrees
Optical Shift: +15%, -10% Vertical
INPUTS/OUTPUTS:
2x HDMI (v.2.0a - HDCP 2.2)
1x HDMI-MHL (v.2.0a - HDCP 2.2)
1x USB (A type - power)
1x mini USB (B type for FW upgrade)
1 x RS232 (D-sub 9 pin)
2x IR receivers
1x wired IR receiver
1x Audio IN (mini-jack)
1x Audio OUT (mini-jack)
ELECTRONICS AND GENERAL SPECIFICATIONS
Vertical scan freq.: 24-30 Hz/47-120 Hz
UHD: @ 24/25/30/50/60 Hz
Mains voltage range: 100-240 +/-10% (50/60 Hz)
Power consumption: 410W (normal mode), <0.5W (stand-by)
Projector weight: 17 Kg. / 37.5 lbs
Projector dimensions (WxHxD): 450 x 181 x 420 mm (17.7” x 7.1” x 16.5”) - lever feet included in height
Cabinet finish: Black or White crystal-glass
(1) This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.
(2) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.
Due to constant product development, specifications are subject to change without notice.